Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PETG WS-501 JIANGYIN HUAHONG
--
Electrical applications
High toughness、High gloss
Other
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501 |
|---|---|---|---|
| Dart impact | Normal temperature | ASTM D358 | 1701 g |
| elongation | @Yield 50mm/min(2 inch/min) | ASTM D638 | 3.7 % |
| @Break 50mm/min(2 inch/min) | ASTM D638 | 136 % | |
| tensile strength | @Yield 50mm/min(2 inch/min) | ASTM D638 | 496 Kgf/cm2 |
| Dart impact | Low temperature | ASTM D358 | 791 g |
| Rockwell hardness | R-Scale | 106 °C | |
| Flexural modulus | 1.27mm/min(3 inch/min) | ASTM D790 | 20800 Kgf/cm2 |
| tensile strength | @Break 50mm/min(2 inch/min) | ASTM D638 | 281 Kgf/cm2 |
| Impact strength of cantilever beam gap | @23°C | ASTM D256 | 98 J/m |
| bending strength | 1.27mm/min(2 inch/min) | ASTM D790 | 620 Kgf/cm2 |
| Electrical performance | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501 |
|---|---|---|---|
| dielectric constant | 1 kHz | ASTM D150 | 2.6 – |
| Surface Resistivity | ASTM D257 | 10^16 Ohm | |
| dielectric constant | 1 MHz | ASTM D150 | 2.4 – |
| Volume resistivity | ASTM D257 | 10^15 ohm·cm | |
| dielectric dissipation factor | 1 MHz | ASTM D150 | 0.023 – |
| dielectric strength | (short time,500V/sec) | ASTM D149 | 16 kV·mm |
| dielectric dissipation factor | 1 kHz | ASTM D150 | 0.005 – |
| optical performance | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501 |
|---|---|---|---|
| Haze ratio | / | <1.0 % | |
| transmittance | ASDM D541 | 90 % | |
| refractive index | ASDM D542 | 1.52 |
| Flame retardant performance | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501 |
|---|---|---|---|
| UL flame retardant rating | 1.50mm | UL 94 | HB - |
| 3.00mm | UL 94 | V-2 - | |
| 1.00mm | UL 94 | HB - |
| physical property | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501 |
|---|---|---|---|
| Water absorption rate | ASTM D570 | 0.15 % | |
| Viscosity | Ubbelodhe viscometer | 0.750±0.015 dl/g | |
| proportion | ASTM D792 | 1.29 kg/cm3 |
| Thermal performance | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501 |
|---|---|---|---|
| Heat distortion temperature | @0.45MPa | ASTM D648 | 77 °C |
| melting point | / | ≥196±2 °C | |
| Melt flow index | ASTM D 1238:04 | 1.2 g/10min |
Contact Us
Get App
Top