Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE P600 BK KOREA PETROCHEMICAL
YUHWA HIDEN®
Pipeline system、Gas pipe
Creep resistance、PE100、Super anti creep、SCG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | KOREA PETROCHEMICAL/P600 BK |
|---|---|---|---|
| water content | ASTM D-570 | ＜0.01 % | |
| melt mass-flow rate | 5.0kg | ASTM D-1238 | 0.23 g/10min |
| density | ASTM D-1505 | 0.95 g/cm |
| Mechanical properties | Test Condition | Test Method | KOREA PETROCHEMICAL/P600 BK |
|---|---|---|---|
| tensile strength | 屈服点 | ASTM D-638 | 240 kg/cm |
| Resistance to fragmentation | ASTM D-1693 | ＞5000 hr.cond.B.10% | |
| Shore hardness | ASTM D-785 | 40 R scale | |
| Impact strength of cantilever beam gap | ASTM D-256 | ＞50 kg.cm/cm | |
| Flexural modulus | ASTM D-790 | 9000 kg/cm | |
| elongation at break | ASTM D-638 | ＞600 % |
| Electrical performance | Test Condition | Test Method | KOREA PETROCHEMICAL/P600 BK |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1 | |
| Loss factor | ASTM D-150 | 2 | |
| dielectric strength | 短时 | ASTM D-149 | 48 KV/mm |
| permittivity | ASTM D-150 | 2.3 |
| physical property | Test Condition | Test Method | KOREA PETROCHEMICAL/P600 BK |
|---|---|---|---|
| Shrinkage rate | KPIC Method | 1.5-2.5 % |
| Thermal performance | Test Condition | Test Method | KOREA PETROCHEMICAL/P600 BK |
|---|---|---|---|
| Low temperature brittleness temperature | ASTM D-746 | ＜-70 °C | |
| degree of heat | KPIC Method | 0.45 cal/g℃ | |
| Heat distortion temperature | HDT | ASTM D-648 | 65 °C |
| melting temperature | ASTM D-3418 | 133 °C | |
| vicat | ASTM D-1525 | 124 °C | |
| Linear coefficient of thermal expansion | ASTM D-696 | 1.5 |
Contact Us
Get App
Top