Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Stratasys PC-ISO Stratasys
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Stratasys/Stratasys PC-ISO |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 53 J/m |
| Impact strength of cantilever beam gap | 23°C | ASTM D256A | 85 J/m |
| Mechanical properties | Test Condition | Test Method | Stratasys/Stratasys PC-ISO |
|---|---|---|---|
| elongation | 断裂,3.18mm | ASTM D638 | 4.0 % |
| Tensile modulus | 3.18mm | ASTM D638 | 2000 MPa |
| Flexural modulus | ASTM D790 | 2140 MPa | |
| bending strength | ASTM D790 | 90.3 MPa | |
| tensile strength | 3.18mm | ASTM D638 | 57.2 MPa |
| Electrical performance | Test Condition | Test Method | Stratasys/Stratasys PC-ISO |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 5.0E-4到9.0E-4 | |
| dielectric strength | ASTM D149 | 2.8to15 kV/mm | |
| dielectric constant | ASTM D150 | 2.80to3.00 | |
| Volume resistivity | ASTM D257 | 8.0E+13到1.5E+14 ohms |
| flammability | Test Condition | Test Method | Stratasys/Stratasys PC-ISO |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | Stratasys/Stratasys PC-ISO |
|---|---|---|---|
| thickness | 层能力 | 177.8to330.2 µm | |
| density | ASTM D792 | 1.20 g/cm³ |
| Thermal performance | Test Condition | Test Method | Stratasys/Stratasys PC-ISO |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 127 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 133 °C | |
| vicat | ISO 306 | 139 °C | |
| Glass Transition Temperature | DMA | 161 °C |
Contact Us
Get App
Top