Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEI Ultron® 150C6 Asia International Enterprise (Hong Kong) Limited
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Asia International Enterprise (Hong Kong) Limited/Ultron® 150C6 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 14 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 53 kJ/m² |
| hardness | Test Condition | Test Method | Asia International Enterprise (Hong Kong) Limited/Ultron® 150C6 |
|---|---|---|---|
| Rockwell hardness | M计秤 | ISO 2039-2 | 125 |
| Mechanical properties | Test Condition | Test Method | Asia International Enterprise (Hong Kong) Limited/Ultron® 150C6 |
|---|---|---|---|
| Flexural modulus | ISO 178 | 16500 MPa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 1.5 % |
| tensile strength | 屈服 | ISO 527-2/1270 | 210 MPa |
| bending strength | ISO 178 | 285 MPa |
| Electrical performance | Test Condition | Test Method | Asia International Enterprise (Hong Kong) Limited/Ultron® 150C6 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | <1.0E+2 ohms·cm |
| flammability | Test Condition | Test Method | Asia International Enterprise (Hong Kong) Limited/Ultron® 150C6 |
|---|---|---|---|
| UL flame retardant rating | 1.60mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Asia International Enterprise (Hong Kong) Limited/Ultron® 150C6 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.10 % |
| MD | ISO 294-4 | 0.050 % | |
| Water absorption rate | 饱和,23°C | ISO 62 | 0.18 % |
| density | ISO 1183 | 1.39 g/cm³ |
| Thermal performance | Test Condition | Test Method | Asia International Enterprise (Hong Kong) Limited/Ultron® 150C6 |
|---|---|---|---|
| thermal conductivity | ISO 8302 | 0.52 W/m/K | |
| Linear coefficient of thermal expansion | MD：-20到150°C | ISO 11359-2 | 2.8E-04 cm/cm/°C |
| vicat | ISO 306/B50 | 225 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 210 °C |
Contact Us
Get App
Top