plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS P2HGV BK901510 INEOS USA
Novodur® 
Automotive sector,Application in the automotive field
heat-resisting,high strength,High rigidity,Filler: Glass fiber reinf,16% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodINEOS USA/P2HGV BK901510
Ball Pressure TestISO 2039-1135 Mpa
thermal performanceTest ConditionTest MethodINEOS USA/P2HGV BK901510
Hot deformation temperature1.8MPa,AnnealedISO 75-2/A102 °C
0.45MPa,AnnealedISO 75-2/B106 °C
Linear coefficient of thermal expansionMDISO 11359-14E-05 cm/cm/°C
Vicat softening temperatureISO 306/B50105 °C
mechanical propertiesTest ConditionTest MethodINEOS USA/P2HGV BK901510
Bending modulusISO 1785400 Mpa
bending strengthISO 178101 Mpa
Tensile modulusISO 527-25500 Mpa
Tensile strainBreak,23°CISO 527-22.0 %
tensile strengthBreak,23°CISO 527-274.0 Mpa
Yield,23°CISO 527-274.0 Mpa
Electrical performanceTest ConditionTest MethodINEOS USA/P2HGV BK901510
Compared to the anti leakage trace indexIEC 60112 V
Dielectric strength1.50mmIEC 60243-132 KV/mm
Dissipation factor1MHzIEC 602506E-03
100HzIEC 602505E-03
Relative permittivity100HzIEC 602502.90
1MHzIEC 602503.10
Surface resistivityIEC 600931E+14 ohms
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodINEOS USA/P2HGV BK901510
ash content16 %
Melt Volume Flow Rate (MVR)220°C/10.0kgISO 11333.00 cm3/10min
Shrinkage rateISO 294-40.20-0.40 %
impact performanceTest ConditionTest MethodINEOS USA/P2HGV BK901510
Impact strength of simply supported beam without notch-30°CISO 17920 kJ/m²
23°CISO 17918 kJ/m²