plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS M202AS Ineos ABS
--
General purpose
Static electricity function
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Basic PerformanceTest ConditionTest MethodIneos ABS/M202AS
densityISO 11831.05
Melt Volume Flow Rate (MVR)220℃,10kgISO 113332.0 cm
thermal performanceTest ConditionTest MethodIneos ABS/M202AS
Combustibility1.60mmUL 94HB
Hot deformation temperature1.80MPa，UnannealedISO 75-194.0 ℃
0.45MPa，UnannealedISO 75-198.0 ℃
Linear coefficient of thermal expansion23℃-50℃ISO 11359-10.000090 cm/cm℃
Vicat softening temperature50℃/h 50NISO 306100 ℃
mechanical propertiesTest ConditionTest MethodIneos ABS/M202AS
Bending modulusISO 1782300 MPa
bending strengthISO 17870.0 MPa
Charpy Notched Impact Strength23℃ISO 179/1eA16.0 KJ/m
Fracture strainISO 527-115 %
Impact strength of cantilever beam gap23℃ISO 180/1A15.0 KJ/m
-30℃ISO 180/1A8.00 KJ/m
Impact strength of simply supported beam without notch23℃ISO 179/1eU100 KJ/m
-30℃ISO 179/1eU80.0 KJ/m
Shore hardnessISO 2039-1100.0 MPa
Tensile modulusISO 527-12300 MPa
Tensile strainYieldISO 527-12.4 %
Tensile stressYieldISO 527-144.0 MPa
Electrical performanceTest ConditionTest MethodIneos ABS/M202AS
Dielectric loss1E+6HzIEC 602500.00800
100HzIEC 602500.00500
Dielectric strengthIEC 60243-136 KV/mm
Relative permittivity100HzIEC 602503.00
1E+6HzIEC 602503.00
Surface resistivityIEC 600931E+15 ohms
Volume resistivityIEC 600931E+15 ohm.m
Physical propertiesTest ConditionTest MethodIneos ABS/M202AS
Shrinkage rateTransverseISO 294-40.40-0.70 %
FlowISO 294-40.40-0.70 %

Contact Us

Get App

Top