Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP PM370 BE Spain Repsol
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Spain Repsol/PM370 BE |
|---|---|---|---|
| melt mass-flow rate | 230℃，2.16kg | ISO 1133 | 15 g/10min |
| density | ISO 1183 | 1.14 g/cm |
| Mechanical properties | Test Condition | Test Method | Spain Repsol/PM370 BE |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 0℃ | ISO 180 | 16 kj/m |
| 23℃ | ISO 180 | 26 kj/m | |
| Impact strength of cantilever beam gap | 0℃ | ISO 180 | 3 kj/m |
| tensile strength | ISO 527-2 | 29 MPa | |
| Impact strength of cantilever beam gap | 23℃ | ISO 180 | 4 kj/m |
| elongation | ISO 527-2 | 4 % | |
| Impact strength of cantilever beam gap | -20℃ | ISO 180 | 3 kj/m |
| Flexural modulus | MPa | IS0 180 3200 |
| physical property | Test Condition | Test Method | Spain Repsol/PM370 BE |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.60-0.70 % |
| Thermal performance | Test Condition | Test Method | Spain Repsol/PM370 BE |
|---|---|---|---|
| vicat | ISO 306/A50 | 154 ℃ | |
| ISO 306/B50 | 96 ℃ | ||
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-2/B | 116 ℃ |
| 1.80MPa，HDT | ISO 75-2/A | 66 ℃ |
Contact Us
Get App
Top