Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO PX1112-701 SABIC INNOVATIVE US
NORYL™ 
Automotive body panels、Automotive sector
Dimensional stability、Low Specific Gravity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodSABIC INNOVATIVE US/PX1112-701
Charpy Notched Impact Strength23°CISO 179/1eA17 kJ/m²
-30°CISO 179/1eA10 kJ/m²
Impact strength of cantilever beam gap-30°CISO 180/1A10 kJ/m²
23°CISO 180/1A17 kJ/m²
hardnessTest ConditionTest MethodSABIC INNOVATIVE US/PX1112-701
ball-indentation hardnessH 358/30ISO 2039-180.0 Mpa
Mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/PX1112-701
Tensile modulusISO 527-2/12100 Mpa
tensile strength 屈服ISO 527-2/5040.0 Mpa
bending strengthISO 17870.0 Mpa
Flexural modulusISO 1781900 Mpa
Taber abraser1000 Cycles, 1000 g, CS-17 转轮内部方法65.0 mg
Tensile strain断裂ISO 527-2/5030 %
屈服ISO 527-2/503.0 %
tensile strength 断裂ISO 527-2/5040.0 Mpa
Electrical performanceTest ConditionTest MethodSABIC INNOVATIVE US/PX1112-701
relative permittivity50 HzIEC 602502.70
Dissipation Factor1 MHzIEC 602501.0E-3
Volume resistivityIEC 600931.0E+15 ohms·cm
Dissipation Factor60 HzIEC 602504.0E-4
relative permittivity1 MHzIEC 602502.60
Dissipation Factor50 HzIEC 602504.0E-4
Surface ResistivityIEC 60093> 1.0E+15 ohms
relative permittivity60 HzIEC 602502.70
flammabilityTest ConditionTest MethodSABIC INNOVATIVE US/PX1112-701
UL flame retardant rating1.6 mmUL 94HB
physical property Test ConditionTest MethodSABIC INNOVATIVE US/PX1112-701
Water absorption rate平衡, 23°C, 50% RHISO 620.060 %
Shrinkage rateFlow内部方法0.50 - 0.70 %
Melt volume flow rate280°C/5.0 kgISO 11336.00 cm3/10min
Water absorption rate饱和, 23°CISO 620.30 %
Thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/PX1112-701
thermal conductivityISO 83020.23 W/m/K
vicat--ISO 306/B120125 °C
Linear coefficient of thermal expansion横向 : 23 到 80°CISO 11359-29.0E-5 cm/cm/°C
流动 : 23 到 80°CISO 11359-27.0E-5 cm/cm/°C
ball-indentation hardness73 到 77°CIEC 60695-10-2通过
Heat distortion temperature0.45 MPa, 未退火, 4.00 mm, 100 mm 跨距，HDTISO 75-2/Be120 °C
vicat--ISO 306/A50130 °C
Heat distortion temperature1.8 MPa, 未退火, 4.00 mm, 100 mm 跨距，HDTISO 75-2/Ae105 °C
vicat--ISO 306/B50120 °C
injectionTest ConditionTest MethodSABIC INNOVATIVE US/PX1112-701
drying time2.0 to 3.0 hr
Temperature in the middle of the barrel260 to 280 °C
Temperature at the rear of the barrel240 to 260 °C
Processing (melt) temperature280 to 300 °C
Hopper temperature60 to 80 °C
drying temperature100 to 120 °C
Temperature at the front of the material cylinder280 to 300 °C
Temperature80 to 120 °C
Spray nozzle temperature260 to 280 °C

Contact Us

Get App

Top