Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC G-3310M BK TEIJIN JAPAN

PANLITE®

Camera applications,Mechanical components,Engineering accessories,Camera applications,Industrial applications

High rigidity,transparent,enhance,Low anisotropy,Filler: Glass fiber reinf,10% filler by weight

Plastic Datasheets

thermal performance	Test Condition	Test Method	TEIJIN JAPAN/G-3310M BK
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	135 °C
Hot deformation temperature		1.8MPa,Unannealed	ISO 75-2/A	124 °C
Linear coefficient of thermal expansion	TD	ISO 11359-2	6E-05 cm/cm/°C
Linear coefficient of thermal expansion		MD	ISO 11359-2	6E-05 cm/cm/°C
RTI Elec	1.5mm	UL 746	130 °C
RTI Imp	1.5mm	UL 746	120 °C
RTI Str	1.5mm	UL 746	130 °C
Vicat softening temperature		ISO 306/B50	140 °C

mechanical properties	Test Condition	Test Method	TEIJIN JAPAN/G-3310M BK
Bending modulus		ISO 178	2600 Mpa
bending strength		ISO 178	90.0 Mpa
Tensile modulus		ISO 527-2/1	2700 Mpa
Tensile strain	Break	ISO 527-2/5	60 %
tensile strength	Break	ISO 527-2/5	55.0 Mpa

Electrical performance	Test Condition	Test Method	TEIJIN JAPAN/G-3310M BK
Compared to the anti leakage trace index		IEC 60112	PLC 3
Dielectric strength		IEC 60243-1	35 KV/mm
Dissipation factor	1MHz	IEC 60250	9E-03
Dissipation factor		100Hz	IEC 60250	1E-03
Relative permittivity	100Hz	IEC 60250	3.20
Relative permittivity		1MHz	IEC 60250	3.20
Surface resistivity		IEC 60093	>1.0E+15 ohms
Volume resistivity		IEC 60093	>1.0E+15 ohms·cm

Physical properties	Test Condition	Test Method	TEIJIN JAPAN/G-3310M BK
Shrinkage rate	MD:4.00mm	Internal Method	0.50-0.70 %
Shrinkage rate		TD:4.00mm	Internal Method	0.50-0.70 %
Water absorption rate	23°C,24hr	ISO 62	0.16 %

impact performance	Test Condition	Test Method	TEIJIN JAPAN/G-3310M BK
Impact strength of simply supported beam without notch		ISO 179	NoBreak

flammability	Test Condition	Test Method	TEIJIN JAPAN/G-3310M BK
UL flame retardant rating	0.8mm	UL 94	V-2

Get App

Top