Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS (0.275 inch) Aristech Acrylics LLC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Aristech Acrylics LLC/(0.275 inch) |
|---|---|---|---|
| Impact strength of cantilever beam gap | 6.99mm | ASTM D256A | 130 J/m |
| Dart impact | 6.99mm | 内部方法 | >40.7 J |
| Supplementary Information | Test Condition | Test Method | Aristech Acrylics LLC/(0.275 inch) |
|---|---|---|---|
| HotFormingTemperature | ABSSide:6.99mm | 内部方法 | 149to171 °C |
| AcrylicSide:6.99mm | 内部方法 | 177to193 °C | |
| CyclesFreeze-Thaw | -29到82°C,6.99mm | 内部方法 | NoEffect |
| hardness | Test Condition | Test Method | Aristech Acrylics LLC/(0.275 inch) |
|---|---|---|---|
| Barcol Hardness | 6.99mm | ASTM D2583 | 52 |
| Rockwell hardness | M级,6.99mm | ASTM D785 | 97 |
| Mechanical properties | Test Condition | Test Method | Aristech Acrylics LLC/(0.275 inch) |
|---|---|---|---|
| Flexural modulus | 6.99mm5 | ASTM D790 | 2160 MPa |
| Tensile modulus | 6.99mm | ASTM D638 | 2620 MPa |
| Flexural modulus | 6.99mm4 | ASTM D790 | 2140 MPa |
| bending strength | 6.99mm4 | ASTM D790 | 68.9 MPa |
| elongation | 断裂,6.99mm | ASTM D638 | 5.0 % |
| bending strength | 6.99mm5 | ASTM D790 | 74.5 MPa |
| tensile strength | 屈服,6.99mm | ASTM D638 | 44.8 MPa |
| flammability | Test Condition | Test Method | Aristech Acrylics LLC/(0.275 inch) |
|---|---|---|---|
| UL flame retardant rating | 7.0mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Aristech Acrylics LLC/(0.275 inch) |
|---|---|---|---|
| Water absorption rate | 饱和,6.99mm | ASTM D570 | 0.19 % |
| density | ASTM D792 | 1.10 g/cm³ |
| Thermal performance | Test Condition | Test Method | Aristech Acrylics LLC/(0.275 inch) |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：6.99mm | ASTM D696 | 7.9E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火,6.99mm，HDT | ASTM D648 | 89.4 °C |
Contact Us
Get App
Top