Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS+PVC KYDEX® 430 Sekisui (Hong Kong) Limited
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 430 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 22°C,3.18mm | ASTM D256 | 180 J/m |
| Supplementary Information | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 430 |
|---|---|---|---|
| Temperature | >1.00mm | 163to204 °C |
| Mechanical properties | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 430 |
|---|---|---|---|
| Flexural modulus | 3.18mm | ASTM D790 | 2390 MPa |
| tensile strength | 屈服,3.18mm | ASTM D638 | 50.9 MPa |
| bending strength | 3.18mm | ASTM D790 | 74.1 MPa |
| flammability | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 430 |
|---|---|---|---|
| UL flame retardant rating | 1.0mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 430 |
|---|---|---|---|
| Shrinkage rate | 0.50to0.70 % | ||
| density | ASTM D792 | 1.29 g/cm³ |
| Thermal performance | Test Condition | Test Method | Sekisui (Hong Kong) Limited/KYDEX® 430 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 73.3 °C |
| 1.8MPa,退火,3.18mm3，HDT | ASTM D648 | 82.7 °C | |
| ball-indentation hardness | 3.18mm | IEC 60695-10-2 | 通过 |
Contact Us
Get App
Top