plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM OL-10 CF2001 JAPAN POLYPLASTIC
DURACON®
Automotive sector
High rigidity,filling,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/OL-10 CF2001
Rockwell hardnessM-ScaleISO 2039-270
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/OL-10 CF2001
ColourNumberCF2001
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/OL-10 CF2001
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A82.0 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method1.2E-04 cm/cm/°C
TD:23to55°CInternal Method1.2E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/OL-10 CF2001
Bending modulusISO 1782200 Mpa
bending strengthISO 17870.0 Mpa
Friction coefficientDynamic2JISK72180.30
Steel - Dynamic3JISK72180.19
Nominal tensile fracture strainISO 527-246 %
Tensile modulusISO 527-22350 Mpa
tensile strengthISO 527-248.0 Mpa
Wear factor0.98MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.98MPa,0.30m/sec5JISK721840 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK72181200 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72183000 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/OL-10 CF2001
Surface resistivityIEC 600932E+16 ohms
Volume resistivityIEC 600935E+14 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/OL-10 CF2001
densityISO 11831.41 g/cm³
melt mass-flow rate190°C/2.16kgISO 113310 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11339.00 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.9 %
MD:2.00mmISO 294-41.9 %
Water absorption rate23°C,24hrISO 620.60 %
impact performanceTest ConditionTest MethodJAPAN POLYPLASTIC/OL-10 CF2001
Charpy Notched Impact Strength23°CISO 179/1eA5.8 kJ/m²
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/OL-10 CF2001
UL flame retardant ratingUL 94HB