Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS 1130T6 HD9050 JAPAN POLYPLASTIC
DURAFIDE®
Fiber grade
Flame retardant,High impact resistance,Glass fiber reinforced,enhance,Filler: Glass fiber reinf,30%,Filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T6 HD9050 |
|---|---|---|---|
| Rockwell hardness | M-Scale | ISO 2039-2 | 85 |
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T6 HD9050 |
|---|---|---|---|
| ColourNumber | HD9050 |
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T6 HD9050 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 255 °C |
| Linear coefficient of thermal expansion | TD | Internal Method | 4E-05 cm/cm/°C |
| MD | Internal Method | 2E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T6 HD9050 |
|---|---|---|---|
| Bending modulus | ISO 178 | 8800 Mpa | |
| bending strength | ISO 178 | 220 Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.3 % |
| tensile strength | ISO 527-2 | 155 Mpa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T6 HD9050 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | V | |
| Dielectric strength | 3.00mm | IEC 60243-1 | 18 KV/mm |
| Dissipation factor | 1MHz | IEC 60250 | 4E-03 |
| 耐电弧性 | IEC 60250 | 123 sec | |
| 1kHz | IEC 60250 | 3E-03 | |
| Relative permittivity | 1kHz | IEC 60250 | 3.90 |
| 1MHz | IEC 60250 | 3.90 | |
| Volume resistivity | IEC 60093 | 8E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T6 HD9050 |
|---|---|---|---|
| Melt viscosity | 310°C,1000sec^-1 | ISO 11443 | 400000 mPa·s |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.060 % |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T6 HD9050 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |