Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 RF-700-12 SABIC INNOVATIVE US
LNP™ VERTON™
Automotive components,Electronic and electrical accessories,Good molding function
Low temperature resistanc,High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | SABIC INNOVATIVE US/RF-700-12 |
|---|---|---|---|
| density | ASTM D792A | 1.58 | |
| Shrinkage rate | ,Across Flow: 24 hr | ISO 294-4 | 0.20 % |
| ,Flow: 24 hr | ISO 294-4 | 0.18 % | |
| ,Flow: 24 hr | ASTM D955 | 0.10 % | |
| Water absorption rate | ASTM D570 | 0.0100 % |
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/RF-700-12 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa Unannealed | ASTM D648 | 241 °C |
| 1.8MPa Unannealed | ISO 75-2/A | 253 °C | |
| 0.45MPa Unannealed | ISO 75-2/B | 258 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/RF-700-12 |
|---|---|---|---|
| bending strength | ,- | ASTM D790 | 372 Mpa |
| ,- | ISO 178 | 371 Mpa | |
| Elongation at Break | ASTM D638 | 1.9 % | |
| Tensile modulus | ASTM D638 | 17500 Mpa | |
| ISO 527-2 | 18400 Mpa | ||
| tensile strength | ASTM D638 | 254 Mpa | |
| ISO 527-2 | 256 Mpa |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/RF-700-12 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18 mm | ASTM D256 | 384 J/m |