Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM Homopolymer Stock Shapes 150 ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodENSINGER GERMANY/Stock Shapes 150
Suspended wall beam without notch impact strengthASTM D25680 J/m
hardnessTest ConditionTest MethodENSINGER GERMANY/Stock Shapes 150
Rockwell hardnessM级ASTM D78594
R级ASTM D785120
Supplementary InformationTest ConditionTest MethodENSINGER GERMANY/Stock Shapes 150
limiting pv value1460 psi·fpm
Mechanical propertiesTest ConditionTest MethodENSINGER GERMANY/Stock Shapes 150
elongation断裂ASTM D63825 %
compressive strengthASTM D69535.9 MPa
Tensile modulusASTM D6383100 MPa
Flexural modulusASTM D7902900 MPa
tensile strength 屈服ASTM D63875.8 MPa
bending strengthASTM D790110 MPa
Wear factorASTM D3702110 10^-8mm³/N·m
coefficient of friction与自身-动态0.20
Electrical performanceTest ConditionTest MethodENSINGER GERMANY/Stock Shapes 150
Dissipation Factor60HzASTM D1505E-03
dielectric constant60HzASTM D1503.70
Volume resistivityASTM D2571E+15 ohms·cm
dielectric strengthASTM D14920 kV/mm
flammabilityTest ConditionTest MethodENSINGER GERMANY/Stock Shapes 150
UL flame retardant ratingUL 94HB
physical property Test ConditionTest MethodENSINGER GERMANY/Stock Shapes 150
Water absorption rate饱和ASTM D5700.90 %
24hrASTM D5700.25 %
densityASTM D7921.42 g/cm³
Thermal performanceTest ConditionTest MethodENSINGER GERMANY/Stock Shapes 150
Heat distortion temperature1.8MPa,未退火，HDTASTM D648125 °C
melting temperatureASTM D2133175 °C
Heat distortion temperature0.45MPa,未退火，HDTASTM D648169 °C
Linear coefficient of thermal expansionMDASTM D6961.2E-04 cm/cm/°C
maximum service temperatureIntermittent149 °C
ContinuousUL 746B85 °C

Contact Us

Get App

Top