Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A3 ICF 30 AKRO-PLASTIC GERMANY
AKROMID®
--
Filler: Carbon fiber rein、30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3 ICF 30 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 55 kJ/m² |
| -30°C | ISO 179/1eU | 55 kJ/m² |
| Supplementary Information | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3 ICF 30 |
|---|---|---|---|
| ReinforcementContent | ISO 1172 | 30 % |
| Mechanical properties | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3 ICF 30 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 23000 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 220 Mpa |
| bending strength | ISO 178 | 370 Mpa | |
| Flexural modulus | ISO 178 | 22000 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 2.0 % |
| Fracture bending strain | ISO 178 | 2.5 % |
| Electrical performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3 ICF 30 |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+04 ohms |
| flammability | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3 ICF 30 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3 ICF 30 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.70 % |
| MD | ISO 294-4 | 0.20 % | |
| moisture absorption | 70°C，62%RH | ISO 1110 | 1.9 % |
| Thermal performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/A3 ICF 30 |
|---|---|---|---|
| thermal conductivity | DIN 52612 | 0.42 W/m/K | |
| melting temperature | DIN EN11357-1 | 262 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 254 °C |
| Linear coefficient of thermal expansion | MD：23到80°C | ISO 11359-2 | 6E-06 cm/cm/°C |
| TD：23to80°C | ISO 11359-2 | 7.2E-05 cm/cm/°C |
Contact Us
Get App
Top