Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC G-3110H TEIJIN JAPAN
PANLITE®
Casters,Electrical applications,Mechanical parts with required dimensional accurac,electrical equipment,Electronic components
Flame retardant,transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | TEIJIN JAPAN/G-3110H |
|---|---|---|---|
| Water absorption rate | 24hr，in 23℃ | ASTM D-570 | 0.16 % |
| Mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/G-3110H |
|---|---|---|---|
| Tensile modulus | ASTM D-638 | 4120(42000) MPa(Kgf/cm | |
| bending strength | ASTM D-790 | 132(1350) MPa(Kgf/cm | |
| Impact strength of cantilever beam gap | 艾氏、带缺口厚度6.4mm | ASTM D-256 | 90(9) J/m(kgf·cm/cm) |
| tensile strength | 断裂点 | ASTM D-638 | 83(850) MPa(Kgf/cm |
| Impact strength of cantilever beam gap | 艾氏、带缺口厚度3.2mm | ASTM D-256 | 90(9) J/m(kgf·cm/cm) |
| Flexural modulus | ASTM D-790 | 3530(36000) MPa(Kgf/cm | |
| compressive strength | ASTM D-695 | 109(1110) MPa(Kgf/cm |
| Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/G-3110H |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1 | |
| dielectric constant | 60Hz | ASTM D-150 | 3.16 |
| Dielectric loss | 10，正切 | ASTM D-150 | 0.009 |
| arc resistance | ASTM D-495 | 100 sec | |
| Conductive Track Resistance (CTI) | IEC 112 | 180 V | |
| Dielectric loss | 60Hz，正切 | ASTM D-150 | 0.0008 |
| dielectric strength | 快速加压值厚度1.6mm | ASTM D-149 | 30 KV/mm |
| dielectric constant | 10 | ASTM D-150 | 3.07 |
| processability | Test Condition | Test Method | TEIJIN JAPAN/G-3110H |
|---|---|---|---|
| Shrinkage rate | 垂直方向 | ASTM D-955 | 0.4-0.6 % |
| 流动方向 | ASTM D-955 | 0.3-0.5 % |
| physical property | Test Condition | Test Method | TEIJIN JAPAN/G-3110H |
|---|---|---|---|
| transmittance | 厚度3mm | ASTM D-1003 | 半透明 % |
| Rockwell hardness | ASTM D-785 | 86 M标度 |
| Thermal performance | Test Condition | Test Method | TEIJIN JAPAN/G-3110H |
|---|---|---|---|
| Linear coefficient of thermal expansion | 垂直方向 | ASTM D-696 | 6.7 |
| TEMPERATURE | 电学式，厚度1.47mm | UL 746B | 130 °C |
| Linear coefficient of thermal expansion | 流动方向 | ASTM D-696 | 4.0 |
| Heat distortion temperature | 负荷0.451MPa(4.6kgf/cm)，HDT | ASTM D-648 | 150 °C |
| TEMPERATURE | 非冲击式，厚度1.47mm | UL 746B | 130 °C |
| 冲击式，厚度1.47mm | UL 746B | 120 °C | |
| Heat distortion temperature | 负荷1.813MPa(18.6kgf/cm)，HDT | ASTM D-648 | 146 °C |
Contact Us
Get App
Top