Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PETG Plaskolite PETG Sheet PLASKOLITE USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | PLASKOLITE USA/Plaskolite PETG Sheet |
|---|---|---|---|
| Impact strength of cantilever beam gap | -40°C | ASTM D256 | 37 J/m |
| 23°C | ASTM D256 | 91 J/m |
| hardness | Test Condition | Test Method | PLASKOLITE USA/Plaskolite PETG Sheet |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 105 |
| Electrical performance | Test Condition | Test Method | PLASKOLITE USA/Plaskolite PETG Sheet |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 0.010 |
| Volume resistivity | ASTM D257 | 6E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 15 kV/mm | |
| Surface Resistivity | ASTM D257 | 2E+14 ohms | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.020 |
| dielectric constant | 1kHz | ASTM D150 | 3.40 |
| arc resistance | 3.00mm | ASTM D495 | 125 sec |
| dielectric constant | 1MHz | ASTM D150 | 3.20 |
| Mechanical properties | Test Condition | Test Method | PLASKOLITE USA/Plaskolite PETG Sheet |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 180 % |
| bending strength | 屈服 | ASTM D790 | 68.9 MPa |
| Tensile modulus | ASTM D638 | 2010 MPa | |
| tensile strength | 断裂 | ASTM D638 | 27.6 MPa |
| optical performance | Test Condition | Test Method | PLASKOLITE USA/Plaskolite PETG Sheet |
|---|---|---|---|
| transmissivity | ASTM D1003 | 90.0 % | |
| refractive index | ASTM D542 | 1.567 |
| flammability | Test Condition | Test Method | PLASKOLITE USA/Plaskolite PETG Sheet |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | PLASKOLITE USA/Plaskolite PETG Sheet |
|---|---|---|---|
| Water absorption rate | 饱和 | ASTM D570 | 0.40 % |
| density | ASTM D792 | 1.27 g/cm³ |
| Thermal performance | Test Condition | Test Method | PLASKOLITE USA/Plaskolite PETG Sheet |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 62.8 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 70.0 °C | |
| thermal conductivity | ASTMC177 | 0.21 W/m/K | |
| Continuous use temperature | ASTM D794 | 65.0 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 9.2E-05 cm/cm/°C |
| Glass Transition Temperature | ASTME1356 | 81.1 °C | |
| specific heat | ASTMC351 | 1460 J/kg/°C |
Contact Us
Get App
Top