Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK LF-1002 SABIC INNOVATIVE US
LNP™ THERMOCOMP™
Automotive components、Home appliance components、Electronic and electrical
Hydrolysis resistance、Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/LF-1002 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 50 kJ/m² |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 8.80 J |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 2.50 J | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 4.6 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/LF-1002 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 6500 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 122 Mpa |
| elongation | 屈服 | ASTM D638 | 3.4 % |
| Tensile strain | 屈服 | ISO 527-2/5 | 3.4 % |
| tensile strength | 断裂 | ASTM D638 | 114 Mpa |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 6010 Mpa |
| tensile strength | 屈服 | ISO 527-2/5 | 125 Mpa |
| Tensile modulus | ASTM D638 | 6080 Mpa | |
| elongation | 断裂 | ASTM D638 | 4.2 % |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 203 Mpa |
| Flexural modulus | ISO 178 | 5670 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 4.0 % |
| tensile strength | 屈服 | ASTM D638 | 120 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/LF-1002 |
|---|---|---|---|
| Shrinkage rate | MD：24小时 | ASTM D955 | 0.30-0.60 % |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.070 % |
| 平衡,23°C,50%RH | ISO 62 | 0.12 % | |
| Shrinkage rate | TD：24hr | ASTM D955 | 0.50-0.80 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/LF-1002 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Bf | 285 °C |
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTM D696 | 3.5E-05 cm/cm/°C |
| TD：-30to30°C | ASTM D696 | 4.4E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 326 °C |
| 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | 171 °C | |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 169 °C |
Contact Us
Get App
Top