Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPEE P-40B TOYOBO JAPAN
PELPRENE™
currency
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | TOYOBO JAPAN/P-40B |
|---|---|---|---|
| Shore hardness | ShoreD | ASTM D2240 | 31 |
| thermal performance | Test Condition | Test Method | TOYOBO JAPAN/P-40B |
|---|---|---|---|
| Brittle temperature | ASTM D746 | -65.0 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 2E-04 cm/cm/°C |
| Melting temperature | DSC | 180 °C | |
| Vicat softening temperature | ASTM D1525 | 89.0 °C |
| mechanical properties | Test Condition | Test Method | TOYOBO JAPAN/P-40B |
|---|---|---|---|
| Bending modulus | ASTM D790 | 23.0 Mpa | |
| Compressive modulus | ASTM D695 | 2.40 Mpa | |
| elongation | Break | ASTM D638 | 820 % |
| Taber abraser | 1000Cycles | ASTM D1044 | 20.0 mg |
| tensile strength | Yield | ASTM D638 | 14.0 Mpa |
| Electrical performance | Test Condition | Test Method | TOYOBO JAPAN/P-40B |
|---|---|---|---|
| Dielectric strength | ASTM D149 | 20 KV/mm | |
| Volume resistivity | ASTM D257 | 1E+12 ohms·cm |
| Physical properties | Test Condition | Test Method | TOYOBO JAPAN/P-40B |
|---|---|---|---|
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 10 g/10min |
| Shrinkage rate | MD:2.00mm | ASTM D955 | 0.40 % |
| Water absorption rate | Equilibrium,23°C,65%RH | ASTM D570 | 0.56 % |
| flammability | Test Condition | Test Method | TOYOBO JAPAN/P-40B |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| elastomer | Test Condition | Test Method | TOYOBO JAPAN/P-40B |
|---|---|---|---|
| Permanent compression deformation | ASTM D395 | 49 % | |
| tear strength | ASTM D624 | 76.0 kN/m | |
| tensile strength | 50%Strain | ASTM D412 | 3.40 Mpa |