Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TSU-Ether Innothane® IE-10AH Innovative Polymers, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Uncured Properties | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-10AH |
|---|---|---|---|
| viscosity | 25°C3 | 0.60 Pa·s | |
| 25°C2 | 0.20 Pa·s | ||
| 固化时间(25°C) | 1.7E+02 hr | ||
| GelTime | 10to14 min | ||
| 25°C4 | 1.5 Pa·s |
| thermosetting | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-10AH |
|---|---|---|---|
| Thermosetting components | Hardener | 按重量计算的混合比:100按容量计算的混合比:98 | |
| Resin | 按重量计算的混合比:100按容量计算的混合比:100 | ||
| Demold Time | 180to300 min |
| Cured Properties | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-10AH |
|---|---|---|---|
| elongation | Break | ASTM D638 | 450 % |
| Shore hardness | ShoreA | ASTM D2240 | 5to15 |
| tear strength | ASTM D624 | 4.38 kN/m | |
| tensile strength | ASTM D638 | 1.03 MPa |
| Physical properties | Test Condition | Test Method | Innovative Polymers, Inc./Innothane® IE-10AH |
|---|---|---|---|
| density | 基体Resin | 1.05 g/cm³ | |
| Hardener | 1.07 g/cm³ | ||
| Cured | 1.06 g/cm³ | ||
| Shrinkage rate | MD | ASTM D2566 | 0.10to0.30 % |