Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP PM240 AT Spain Repsol
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Spain Repsol/PM240 AT |
|---|---|---|---|
| melt mass-flow rate | 230℃，2.16kg | ISO 1133 | 3 g/10min |
| density | ISO 1183 | 1.04 g/cm |
| Mechanical properties | Test Condition | Test Method | Spain Repsol/PM240 AT |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 0℃ | ISO 180 | 30 kj/m |
| 23℃ | ISO 180 | 40 kj/m | |
| Impact strength of cantilever beam gap | 0℃ | ISO 180 | 3.25 kj/m |
| tensile strength | ISO 527-2 | 35 MPa | |
| Shore hardness | ISO 868 | 76 | |
| Impact strength of cantilever beam gap | 23℃ | ISO 180 | 5 kj/m |
| elongation | ISO 527-2 | 5 % | |
| Flexural modulus | ISO 178 | 2800 MPa |
| physical property | Test Condition | Test Method | Spain Repsol/PM240 AT |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.90-1.50 % |
| Thermal performance | Test Condition | Test Method | Spain Repsol/PM240 AT |
|---|---|---|---|
| vicat | ISO 306/A50 | 154 ℃ | |
| ISO 306/B50 | 98 ℃ | ||
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-2/B | 120 ℃ |
| 1.80MPa，HDT | ISO 75-2/A | 66 ℃ |
Contact Us
Get App
Top