Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC EP-SS/PC/ABS Integral Technologies, Inc.
--
--
Filler, stainless steel fiber
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Integral Technologies, Inc./EP-SS/PC/ABS |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 57 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 210 J/m |
| Mechanical properties | Test Condition | Test Method | Integral Technologies, Inc./EP-SS/PC/ABS |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| Tensile modulus | ASTM D638 | 4950 MPa | |
| tensile strength | 断裂 | ASTM D638 | 56.0 MPa |
| Flexural modulus | ASTM D790 | 4890 MPa | |
| bending strength | ASTM D790 | 102 MPa |
| Electrical performance | Test Condition | Test Method | Integral Technologies, Inc./EP-SS/PC/ABS |
|---|---|---|---|
| Surface Resistivity | ESDSTM11.11 | 23 ohms | |
| Volume resistivity | ASTM D257 | 6.0 ohms·cm | |
| ESDSTM11.11 | 2.0 ohms | ||
| StaticDecay | 内部方法 | 10 msec |
| flammability | Test Condition | Test Method | Integral Technologies, Inc./EP-SS/PC/ABS |
|---|---|---|---|
| UL flame retardant rating | NoBurn | UL 94 | HB |
| physical property | Test Condition | Test Method | Integral Technologies, Inc./EP-SS/PC/ABS |
|---|---|---|---|
| density | ASTM D792 | 1.67 g/cm³ |
| Thermal performance | Test Condition | Test Method | Integral Technologies, Inc./EP-SS/PC/ABS |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 99.0 °C |
Contact Us
Get App
Top