Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS CN-P Westlake Plastics Company
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 720 J/m | |
| Impact strength of cantilever beam gap | ASTM D256 | 53 J/m |
| Mechanical properties | Test Condition | Test Method | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 11 % |
| Flexural modulus | ASTM D790 | 1930 MPa | |
| tensile strength | 屈服 | ASTM D638 | 27.6 MPa |
| bending strength | ASTM D790 | 49.6 MPa |
| Electrical performance | Test Condition | Test Method | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1.0E+2到1.0E+6 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1.0E+2到1.0E+6 ohms | |
| StaticDecay | MILB-81705 | <0.1 sec |
| flammability | Test Condition | Test Method | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.30 % |
| density | ASTM D792 | 1.03 g/cm³ |
| Thermal performance | Test Condition | Test Method | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 85.0 °C |
Contact Us
Get App
Top