Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Rubber Techsil® IS808 Techsil Limited
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Techsil Limited/Techsil® IS808 |
|---|---|---|---|
| IRHD hardness | BS903 | 39 |
| Supplementary Information | Test Condition | Test Method | Techsil Limited/Techsil® IS808 |
|---|---|---|---|
| VolumetricExpansion | 8.8E-04 cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Techsil Limited/Techsil® IS808 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 4.7E+14 ohms·cm | |
| Surface Resistivity | ASTM D257 | 7.8E+15 ohms | |
| Dissipation Factor | 1MHz | ASTM D150 | 1.2E-03 |
| dielectric constant | 1MHz | ASTM D150 | 3.20 |
| Uncured Properties | Test Condition | Test Method | Techsil Limited/Techsil® IS808 |
|---|---|---|---|
| Curing Time | 23°C | 7.0 hr | |
| surface drying time | 23°C,65%RH | 4.0 min |
| Cured Properties | Test Condition | Test Method | Techsil Limited/Techsil® IS808 |
|---|---|---|---|
| peelstrength | 14.2 N/mm | ||
| compression set | 45 % | ||
| tensile strength | BS903 | 2.32 MPa | |
| elongation | 断裂 | BS903 | 280 % |
| Tensile modulus | -- | 0.650 MPa | |
| tear strength | BS903 | 5.50 kN/m | |
| Shrinkage rate | <1.0 % | ||
| Tensile modulus | --3 | BS903 | 0.910 MPa |
| physical property | Test Condition | Test Method | Techsil Limited/Techsil® IS808 |
|---|---|---|---|
| density | BS903 | 1.05 g/cm³ |
| Thermal performance | Test Condition | Test Method | Techsil Limited/Techsil® IS808 |
|---|---|---|---|
| thermal conductivity | 0.20 W/m/K | ||
| Usage temperature | -60-250 °C | ||
| Linear coefficient of thermal expansion | MD | 2.9E-04 cm/cm/°C |
Contact Us
Get App
Top