Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 310HF.M Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Trinseo/ 310HF.M |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm,注塑 | ASTM D256 | 80 J/m |
| hardness | Test Condition | Test Method | Trinseo/ 310HF.M |
|---|---|---|---|
| Rockwell hardness | R级,3.20mm,注塑 | ASTM D785 | 124 |
| Mechanical properties | Test Condition | Test Method | Trinseo/ 310HF.M |
|---|---|---|---|
| elongation | 断裂,3.20mm,注塑 | ASTM D638 | 3.0 % |
| bending strength | 3.20mm,注塑 | ASTM D790 | 110 MPa |
| tensile strength | 屈服,3.20mm,注塑 | ASTM D638 | 70.0 MPa |
| Flexural modulus | 3.20mm,注塑 | ASTM D790 | 4000 MPa |
| flammability | Test Condition | Test Method | Trinseo/ 310HF.M |
|---|---|---|---|
| UL flame retardant rating | 2.0mm | UL 94 | 5VB |
| 1.0mm | UL 94 | V-0 | |
| 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Trinseo/ 310HF.M |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.20to0.40 % |
| density | ASTM D792 | 1.28 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 18 g/10min |
| Thermal performance | Test Condition | Test Method | Trinseo/ 310HF.M |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 112 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 118 °C | |
| vicat | ASTM D15253 | 132 °C |
Contact Us
Get App
Top