Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA9T NT36 OTSUKAC JAPAN
POTICON
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | OTSUKAC JAPAN/NT36 |
|---|---|---|---|
| Rockwell hardness | M 级 | ASTM D785 | 108 |
| Mechanical properties | Test Condition | Test Method | OTSUKAC JAPAN/NT36 |
|---|---|---|---|
| Wear amount | --2 | 73.5 10^-3 mm³/N·km | |
| elongation | 断裂 | ASTM D638 | 3.0 % |
| bending strength | ASTM D790 | 248 Mpa | |
| Wear amount | of counterpart 3 | 0.00 10^-3 mm³/N·km | |
| Flexural modulus | ASTM D790 | 11900 Mpa | |
| coefficient of friction | 与钢 - 动态 | 0.53 | |
| tensile strength | ASTM D638 | 159 Mpa |
| physical property | Test Condition | Test Method | OTSUKAC JAPAN/NT36 |
|---|---|---|---|
| Shrinkage rate | 横向流动 | 0.90 % | |
| 流动 | 0.40 % | ||
| Water absorption rate | 平衡 | ASTM D570 | 0.20 % |
| Thermal performance | Test Condition | Test Method | OTSUKAC JAPAN/NT36 |
|---|---|---|---|
| Heat Distortion | ASTM D648 | 210 °C | |
| Linear coefficient of thermal expansion | 流动 | ASTM D696 | 2.0E-5 cm/cm/°C |
| injection | Test Condition | Test Method | OTSUKAC JAPAN/NT36 |
|---|---|---|---|
| Injection Pressure | 40.0 to 60.0 Mpa | ||
| Processing (melt) temperature | 260 to 280 °C | ||
| Temperature | 120 to 150 °C |
Contact Us
Get App
Top