Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS PRL ABS-GP1-(color)-EP Polymer Resources Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodPolymer Resources Ltd./PRL ABS-GP1-(color)-EP
Charpy Notched Impact Strength23°CISO 179/1eA19 kJ/m²
Impact strength of cantilever beam gap-40°C,3.18mmASTM D25653 J/m
-30°CISO 180/1A7.4 kJ/m²
23°CISO 180/1A16 kJ/m²
Dart impact3.18mmASTM D302922.6 J
Impact strength of cantilever beam gap23°C,3.18mmASTM D256210 J/m
hardnessTest ConditionTest MethodPolymer Resources Ltd./PRL ABS-GP1-(color)-EP
Rockwell hardnessR级ASTM D785110
Mechanical propertiesTest ConditionTest MethodPolymer Resources Ltd./PRL ABS-GP1-(color)-EP
elongation断裂,3.18mmASTM D63830 %
Flexural modulus3.18mmASTM D7902410 MPa
Tensile modulus3.18mmASTM D6382620 MPa
tensile strength 屈服,3.18mmASTM D63848.3 MPa
断裂,3.18mmASTM D63841.4 MPa
elongation屈服,3.18mmASTM D6382.0 %
bending strength3.18mmASTM D79064.1 MPa
Electrical performanceTest ConditionTest MethodPolymer Resources Ltd./PRL ABS-GP1-(color)-EP
Volume resistivityASTM D2571E+16 ohms·cm
flammabilityTest ConditionTest MethodPolymer Resources Ltd./PRL ABS-GP1-(color)-EP
UL flame retardant rating3.0mmUL 94HB
1.5mmUL 94HB
physical property Test ConditionTest MethodPolymer Resources Ltd./PRL ABS-GP1-(color)-EP
melt mass-flow rate230°C/3.8kgASTM D12383.0to14 g/10min
densityASTM D7921.05 g/cm³
Shrinkage rateMD:3.18mmASTM D9550.50to0.70 %
Thermal performanceTest ConditionTest MethodPolymer Resources Ltd./PRL ABS-GP1-(color)-EP
Heat distortion temperature0.45MPa,未退火,3.18mm,HDTASTM D64887.8 °C
RTI3.0mmUL 74660.0 °C
RTI Imp1.5mmUL 74660.0 °C
Heat distortion temperature1.8MPa,未退火,3.18mm,HDTASTM D64882.2 °C
vicatASTM D1525298.9 °C
RTI Elec1.5mmUL 74660.0 °C
3.0mmUL 74660.0 °C
RTI Imp3.0mmUL 74660.0 °C
RTI1.5mmUL 74660.0 °C

Contact Us

Get App

Top