Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A 60G1 V30 SOLVAY FRANCE
TECHNYL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SOLVAY FRANCE/A 60G1 V30 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 85 J/m |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 9.5 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 60 kJ/m² |
| -30°C | ISO 179/1eU | 60 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SOLVAY FRANCE/A 60G1 V30 |
|---|---|---|---|
| Tensile modulus | 23°C | ISO 527-2/1A | 10200 Mpa |
| elongation | 断裂, 23°C | ISO 527-2 | 2.3 % |
| bending strength | 23°C | ISO 178 | 255 Mpa |
| elongation | 断裂, 23°C | ASTM D638 | 3.0 % |
| bending strength | 23°C | ASTM D790 | 225 Mpa |
| tensile strength | 断裂, 23°C | ISO 527-2/1A | 150 Mpa |
| Flexural modulus | 23°C | ASTM D790 | 10000 Mpa |
| tensile strength | 断裂, 23°C | ASTM D638 | 140 Mpa |
| Electrical performance | Test Condition | Test Method | SOLVAY FRANCE/A 60G1 V30 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | 解决方案 A | IEC 60112 | V |
| Volume resistivity | IEC 60093 | 6.0E+14 ohms·cm | |
| dielectric strength | 0.800 mm | IEC 60243-1 | 38 KV/mm |
| flammability | Test Condition | Test Method | SOLVAY FRANCE/A 60G1 V30 |
|---|---|---|---|
| Hot filament ignition temperature | 0.8 mm | IEC 60695-2-13 | 775 °C |
| UL flame retardant rating | 3.2 mm | UL 94 | V-0 |
| European Railways Certifications | R22 | EN 45545-2 | HL3 |
| Burning wire flammability index | 0.8 mm | IEC 60695-2-12 | 960 °C |
| 3.2 mm | IEC 60695-2-12 | 960 °C | |
| UL flame retardant rating | 0.8 mm | UL 94 | V-0 |
| European Railways Certifications | R23 | EN 45545-2 | HL3 |
| UL flame retardant rating | 1.6 mm | UL 94 | V-0 |
| Limiting Oxygen Index | ISO 4589-2 | 33 % | |
| Burning wire flammability index | 1.6 mm | IEC 60695-2-12 | 960 °C |
| physical property | Test Condition | Test Method | SOLVAY FRANCE/A 60G1 V30 |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.8 % |
| density | ISO 1183/A | 1.46 g/cm³ | |
| Outdoor applicability | 全部 | UL 746C | f1 |
| Thermogravimetric analysis (TGA) | 1%失重温度 | NF F16-101 | I3 |
| Water absorption rate | 24 hr, 23°C | ISO 62 | 0.73 % |
| Shrinkage rate | 流量 | ISO 294-4 | 0.35 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 4.3 % |
| Shrinkage rate | 横向流量 | ISO 294-4 | 1.0 % |
| Thermal performance | Test Condition | Test Method | SOLVAY FRANCE/A 60G1 V30 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 263 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/Af | 245 °C |
| injection | Test Condition | Test Method | SOLVAY FRANCE/A 60G1 V30 |
|---|---|---|---|
| Suggested maximum moisture content | 0.20 % | ||
| Temperature in the middle of the barrel | 265 to 275 °C | ||
| Temperature at the rear of the barrel | 265 to 275 °C | ||
| drying temperature | 80 °C | ||
| Temperature at the front of the material cylinder | 270 to 280 °C | ||
| Temperature | 60 to 90 °C |
Contact Us
Get App
Top