Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 K225-KV DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDSM Additive Manufacturing/ K225-KV
Charpy Notched Impact Strength23°CISO 179/1eA4.0 kJ/m²
-30°CISO 179/1eA3.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU40 kJ/m²
Mechanical propertiesTest ConditionTest MethodDSM Additive Manufacturing/ K225-KV
Nominal tensile fracture strainISO 527-24.0 %
Tensile modulusISO 527-24200 MPa
Tensile strain屈服ISO 527-23.0 %
tensile strength 屈服ISO 527-270.0 MPa
Electrical performanceTest ConditionTest MethodDSM Additive Manufacturing/ K225-KV
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
dielectric strengthIEC 60243-130 kV/mm
Volume resistivityIEC 60093>1.0E+15 ohms·cm
relative permittivity100HzIEC 602503.30
Dissipation Factor100HzIEC 602509E-03
relative permittivity1MHzIEC 602503.20
Surface ResistivityIEC 60093-- ohms
Dissipation Factor1MHzIEC 602500.020
flammabilityTest ConditionTest MethodDSM Additive Manufacturing/ K225-KV
Hot filament ignition temperature0.38mmIEC 60695-2-13930 °C
UL flame retardant rating3.0mmIEC 60695-11-10,-20V-2
Burning wire flammability index3.0mmIEC 60695-2-12960 °C
0.38mmIEC 60695-2-12960 °C
Hot filament ignition temperature3.0mmIEC 60695-2-13850 °C
UL flame retardant rating0.38mmIEC 60695-11-10,-20V-2
physical property Test ConditionTest MethodDSM Additive Manufacturing/ K225-KV
Shrinkage rateTDISO 294-41.0 %
MDISO 294-41.0 %
Water absorption rate平衡,23°C,50%RHISO 622.0 %
饱和,23°CISO 627.5 %
densityISO 11831.21 g/cm³
Thermal performanceTest ConditionTest MethodDSM Additive Manufacturing/ K225-KV
melting temperatureISO 11357-3220 °C

Contact Us

Get App

Top