plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC EFR3000 MITSUBISHI ENGINEERING JAPAN
IUPILON™ 
Non specific food
High mobility,Flame retardant
TDSUL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/EFR3000
Hot deformation temperatureHDTASTM D648/ISO 75137 ℃（℉）
0.45MPa,UnannealedISO 75-2/B137 °C
1.8MPa,UnannealedISO 75-2/A125 °C
Linear coefficient of thermal expansionTDISO 11359-26.7E-05 cm/cm/°C
ASTM D696/ISO 113590.000067 mm/mm.℃
MDISO 11359-26.6E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/EFR3000
Bending modulusISO 1782500 Mpa
ASTM D790/ISO 1782500 kg/cm²(MPa)[Lb/in²]
bending strengthASTM D790/ISO 17892.0 kg/cm²(MPa)[Lb/in²]
ISO 17892.0 Mpa
Elongation at BreakASTM D638/ISO 5274.7 %
Nominal tensile fracture strainISO 527-267 %
Tensile modulusASTM D638/ISO 5272300 kg/cm²(MPa)[Lb/in²]
ISO 527-22300 Mpa
Tensile strainYieldISO 527-24.7 %
tensile strengthASTM D638/ISO 52761.0 kg/cm²(MPa)[Lb/in²]
YieldISO 527-261.0 Mpa
Electrical performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/EFR3000
Dielectric constantASTM D150/IEC 602503.10
Dielectric lossASTM D150/IEC 602500.0090
Dielectric strength1.00mmIEC 60243-131 KV/mm
3.00mmIEC 60243-118 KV/mm
Dissipation factor1MHzIEC 602509E-03
100HzIEC 602506E-04
Relative permittivity100HzIEC 602503.10
1MHzIEC 602503.10
Surface resistivityASTM D257/IEC 600936.0E+15 Ω
IEC 600936E+15 ohms
Volume resistivityIEC 600933E+16 ohms·cm
ASTM D257/IEC 600933.0E+16 Ω.cm
otherTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/EFR3000
characteristic磷含量低（-无）、无溴、阻燃性能
Color不透明
remarks以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整
Physical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/EFR3000
melt mass-flow rate300°C/1.2kgISO 113322 g/10min
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 113321.0 cm3/10min
Shrinkage rateASTM D9550.50-0.70 %
吸水率(Saturation,23°C)0.24 %
MD:3.20mm0.50-0.70 %
TD:3.20mm0.50-0.70 %
Water absorption rateASTM D570/ISO 620.24 %
impact performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/EFR3000
Impact strength of simply supported beam without notch23°CISO 179NoBreak
flammabilityTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/EFR3000
UL flame retardant rating1.0mmUL 94V-0

Contact Us

Get App

Top