Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM TF-20 CF2001 DAICEL MALAYSIA
DURACON®
Fitness equipment,Automotive Applications
wear resistant,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Supplementary Information | Test Condition | Test Method | DAICEL MALAYSIA/TF-20 CF2001 |
---|---|---|---|
ColourNumber | CF2001 |
thermal performance | Test Condition | Test Method | DAICEL MALAYSIA/TF-20 CF2001 |
---|---|---|---|
Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 1.2E-04 cm/cm/°C |
TD:23to55°C | Internal Method | 1.3E-04 cm/cm/°C |
mechanical properties | Test Condition | Test Method | DAICEL MALAYSIA/TF-20 CF2001 |
---|---|---|---|
Bending modulus | ISO 178 | 1550 Mpa | |
bending strength | ISO 178 | 57.0 Mpa | |
Friction coefficient | Dynamic2 | JISK7218 | 0.65 |
Steel - Dynamic3 | JISK7218 | 0.30 | |
Nominal tensile fracture strain | ISO 527-2 | 50 % | |
Tensile modulus | ISO 527-2 | 1700 Mpa | |
tensile strength | ISO 527-2 | 45.0 Mpa | |
Wear factor | 0.060MPa,0.15m/sec6 | JISK7218 | 200 10^-8mm³/N·m |
0.49MPa,0.30m/sec4 | JISK7218 | <1.0 10^-8mm³/N·m | |
0.49MPa,0.30m/sec5 | JISK7218 | 100 10^-8mm³/N·m | |
0.060MPa,0.15m/sec7 | JISK7218 | 200 10^-8mm³/N·m |
Electrical performance | Test Condition | Test Method | DAICEL MALAYSIA/TF-20 CF2001 |
---|---|---|---|
Surface resistivity | IEC 60093 | 8E+13 ohms | |
Volume resistivity | IEC 60093 | 2E+13 ohms·cm |
Physical properties | Test Condition | Test Method | DAICEL MALAYSIA/TF-20 CF2001 |
---|---|---|---|
melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 8.0 g/10min |
Melt Volume Flow Rate (MVR) | 190°C/2.16kg | ISO 1133 | 7.00 cm3/10min |
Shrinkage rate | TD:2.00mm | ISO 294-4 | 1.6 % |
MD:2.00mm | ISO 294-4 | 1.8 % |