Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Modified Plastics MN 6/6-FG 10 美国Modified Plastics
--
--
填料,玻璃纤维增强材料,10%,填料按重量,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest Method美国Modified Plastics/Modified Plastics MN 6/6-FG 10
Impact strength of cantilever beam gap23°C,6.35mmASTM D25637 J/m
Suspended wall beam without notch impact strength23°C,6.35mmASTM D256270 J/m
hardnessTest ConditionTest Method美国Modified Plastics/Modified Plastics MN 6/6-FG 10
Rockwell hardnessR级ASTM D785120
Electrical performanceTest ConditionTest Method美国Modified Plastics/Modified Plastics MN 6/6-FG 10
Dissipation Factor1kHzASTM D1500.030
Volume resistivityASTM D2571E+15 ohms·cm
dielectric strengthASTM D14922 kV/mm
dielectric constant1kHzASTM D1501.90
1MHzASTM D1503.70
100HzASTM D1504.10
Mechanical propertiesTest ConditionTest Method美国Modified Plastics/Modified Plastics MN 6/6-FG 10
elongation屈服ASTM D6383.5 %
bending strength屈服ASTM D790138 MPa
compressive strengthASTM D695117 MPa
Flexural modulusASTM D7904550 MPa
tensile strength 屈服ASTM D63889.6 MPa
shear strengthASTM D73262.1 MPa
physical property Test ConditionTest Method美国Modified Plastics/Modified Plastics MN 6/6-FG 10
Water absorption rate饱和ASTM D5707.6 %
Shrinkage rateMDASTM D9551.7 %
Water absorption rate24hrASTM D5701.3 %
densityASTM D7921.22 g/cm³
Thermal performanceTest ConditionTest Method美国Modified Plastics/Modified Plastics MN 6/6-FG 10
vicatASTM D1525265 °C
MDASTM D6964.5E-05 cm/cm/°C
Hot deformation temperature (HDT)1.8MPa,未退火，HDTASTM D648249 °C
0.45MPa,未退火，HDTASTM D648257 °C

Contact Us

Get App

Top