Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP TechnoFin PP T 22 TECHNOCOMPOUND GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP T 22 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 2.5 kJ/m² |
| -30°C | ISO 179/1eA | 1.4 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 30 kJ/m² |
| -30°C | ISO 179/1eU | 20 kJ/m² |
| hardness | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP T 22 |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 56.0 MPa |
| Electrical performance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP T 22 |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+13 ohms |
| Mechanical properties | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP T 22 |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2/5 | 30.0 MPa |
| Tensile strain | 断裂 | ISO 527-2/5 | 9.5 % |
| Flexural modulus | ISO 178 | 2790 MPa | |
| Tensile modulus | ISO 527-2/1 | 2300 MPa | |
| Tensile strain | 屈服 | ISO 527-2/50 | 5.0 % |
| bending strength | ISO 178 | 48.0 MPa | |
| tensile strength | 屈服 | ISO 527-2/50 | 30.0 MPa |
| physical property | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP T 22 |
|---|---|---|---|
| density | ISO 1183 | 1.05 g/cm³ | |
| Melt volume flow rate | 230°C/2.16kg | ISO 1133 | 16.0 cm³/10min |
| Thermal performance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP T 22 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 114 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 65.0 °C |
Contact Us
Get App
Top