Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS SS10 FR BK USA TPC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | USA TPC/SS10 FR BK |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 37.4 J/m |
| tensile strength | 屈服 | ASTM D-638 | 46.9 MPa |
| bending strength | 屈服 | ASTM D-790 | 79.3 MPa |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D-256 | 160 J/m |
| elongation at break | ASTM D-638 | 2.0 % | |
| Flexural modulus | ASTM D-790 | 6000 MPa |
| Electrical performance | Test Condition | Test Method | USA TPC/SS10 FR BK |
|---|---|---|---|
| Surface Resistivity | ASTM D-257 | 1E+04 ohms | |
| Volume resistivity | ASTM D-257 | 1E+04 ohm.cm |
| physical property | Test Condition | Test Method | USA TPC/SS10 FR BK |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.30 % |
| density | ASTM D-792 | 1.28 g/cm3 | |
| Shrinkage rate | Flow(3.18mm) | ASTM D-955 | 0.60 % |
| Thermal performance | Test Condition | Test Method | USA TPC/SS10 FR BK |
|---|---|---|---|
| UL flame retardant rating | 1.50mm | UL 94 | V-0 |
| Heat distortion temperature | 1.80MPa，未退火，HDT | ASTM D-648 | 141 ℃ |
Contact Us
Get App
Top