Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT HONES® PBT GF30 Guangdong Shunde Hones Polymer Material Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Guangdong Shunde Hones Polymer Material Co., Ltd./HONES® PBT GF30 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 48 kJ/m² | |
| Charpy Notched Impact Strength | ISO 179 | 9.0 kJ/m² | |
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D256 | 80 J/m |
| Mechanical properties | Test Condition | Test Method | Guangdong Shunde Hones Polymer Material Co., Ltd./HONES® PBT GF30 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| tensile strength | ASTM D638 | 120 MPa | |
| Flexural modulus | ASTM D790 | 8000 MPa | |
| bending strength | ASTM D790 | 180 MPa |
| Electrical performance | Test Condition | Test Method | Guangdong Shunde Hones Polymer Material Co., Ltd./HONES® PBT GF30 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| dielectric constant | 1MHz | ASTM D150 | 3.50 |
| flammability | Test Condition | Test Method | Guangdong Shunde Hones Polymer Material Co., Ltd./HONES® PBT GF30 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Guangdong Shunde Hones Polymer Material Co., Ltd./HONES® PBT GF30 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.40to0.80 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.060 % |
| density | ASTM D792 | 1.65 g/cm³ |
| Thermal performance | Test Condition | Test Method | Guangdong Shunde Hones Polymer Material Co., Ltd./HONES® PBT GF30 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 205 °C |
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTM D696 | 2.5E-05 cm/cm/°C |
Contact Us
Get App
Top