Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

SPS S135 IDEMITSU JAPAN
XAREC™
Electrical applications,Household daily necessities
Glass fiber reinforced,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | IDEMITSU JAPAN/S135 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 270 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 250 °C | |
| Linear coefficient of thermal expansion | MD:-30to30°C | TMA | 1.8E-05 cm/cm/°C |
| TD:-30to30°C | TMA | 4.3E-05 cm/cm/°C | |
| RTI Elec | UL 746 | 50.0 °C | |
| RTI Imp | UL 746 | 50.0 °C | |
| RTI Str | UL 746 | 50.0 °C |
| mechanical properties | Test Condition | Test Method | IDEMITSU JAPAN/S135 |
|---|---|---|---|
| Bending modulus | ISO 178 | 9800 Mpa | |
| bending strength | ISO 178 | 200 Mpa | |
| Tensile modulus | ISO 527-2 | 9700 Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.0 % |
| tensile strength | Break | ISO 527-2 | 125 Mpa |
| Electrical performance | Test Condition | Test Method | IDEMITSU JAPAN/S135 |
|---|---|---|---|
| Compared to the anti leakage trace index | CTI)3 | IEC 60112 | PLC 1 |
| Dielectric constant | 1MHz | IEC 60250 | 2.90 |
| Dielectric strength | ASTM D149 | 45 KV/mm | |
| Dissipation factor | 1MHz | IEC 60250 | <1.0E-3 |
| Volume resistivity | IEC 60093 | >1.0E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | IDEMITSU JAPAN/S135 |
|---|---|---|---|
| Shrinkage rate | MD | Internal Method | 0.10-0.40 % |
| TD | Internal Method | 0.50-0.80 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.010 % |
| impact performance | Test Condition | Test Method | IDEMITSU JAPAN/S135 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 40 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | 32 kJ/m² |
| flammability | Test Condition | Test Method | IDEMITSU JAPAN/S135 |
|---|---|---|---|
| UL flame retardant rating | 0.830mm | UL 94 | HB |