plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM VW-09 JAPAN POLYPLASTIC
DURACON®
Fitness equipment,Automotive Applications
wear resistant,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/VW-09
Rockwell hardnessM-ScaleISO 2039-275
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/VW-09
ColourNumberCF2001
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/VW-09
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A95.0 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method1.3E-04 cm/cm/°C
TD:23to55°CInternal Method1.3E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/VW-09
Bending modulusISO 1782100 Mpa
bending strengthISO 17872.0 Mpa
Friction coefficientDynamic2JISK72180.28
Steel - Dynamic3JISK72180.16
Nominal tensile fracture strainISO 527-245 %
Tensile modulusISO 527-22250 Mpa
tensile strengthISO 527-258.0 Mpa
Wear factor0.98MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.98MPa,0.30m/sec5JISK721812 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK7218500 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72187000 10^-8mm³/N·m
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/VW-09
melt mass-flow rate190°C/2.16kgISO 11333.0 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11332.50 cm3/10min
Water absorption rate23°C,24hrISO 620.60 %
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/VW-09
UL flame retardant ratingUL 94HB