Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC L-1225L JIAXING TEIJIN
PANLITE®
Electrical appliances、Electrical field、Electronic field
High mobility、Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| Water absorption rate | 24hr，in 23℃ | ASTM D-570 | 0.20 % |
| Mechanical properties | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| Tensile modulus | ASTM D-638 | 2170(22100) MPa(Kgf/cm | |
| bending strength | ASTM D790/ISO 178 | 90 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 2280 kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D-785 | 77 M标度 | |
| Impact strength of cantilever beam gap | 艾氏、带缺口厚度3.2mm | ASTM D-256 | 780(80) j/m(kgf.cm/cm) |
| elongation at break | 断裂点，- | ASTM D-638 | 140 - |
| elongation | ASTM D638/ISO 527 | 6 % | |
| compressive strength | ASTM D-695 | 77(790) MPa(Kgf/cm | |
| elongation at break | 屈服点，- | ASTM D-638 | 6 - |
| ASTM D638/ISO 527 | 140 % | ||
| Rockwell hardness | ASTM D785 | 77 | |
| tensile strength | ASTM D638/ISO 527 | 63 kg/cm²(MPa)[Lb/in²] | |
| 断裂点，- | ASTM D-638 | 74(750) MPa(Kgf/cm | |
| Impact strength of cantilever beam gap | 艾氏、带缺口厚度6.4mm | ASTM D-256 | 100(10) j/m(kgf.cm/cm) |
| bending strength | ASTM D-790 | 90(920) MPa(Kgf/cm | |
| Flexural modulus | ASTM D-790 | 2280(23300) MPa(Kgf/cm | |
| tensile strength | 屈服点，- | ASTM D-638 | 63(640) MPa(Kgf/cm |
| refractive index | ASTM D-542 | 1.585 |
| Electrical performance | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 3 | |
| Compared to the Leakage Tracking Index (CTI) | CTI | IEC 112 | PLC 2 |
| dielectric constant | 60Hz(10 | ASTM D-150 | 2.95(2.9) |
| Dielectric loss | 60Hz(10，正切 | ASTM D-150 | 0.0004(0.009) |
| arc resistance | ASTM D-495 | 110 sec | |
| dielectric strength | 快速加压值厚度1.6mm | ASTM D-149 | 30 KV/mm |
| arc resistance | ASTM D495/IEC 60112 | 110 |
| optical performance | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| transmittance | ASTM D1003/ISO 13468 | 88 % |
| other | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| purpose | 电子元件 |
| Physical properties | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.5-0.7 % | |
| density | ASTM D792/ISO 1183 | 1.2 | |
| Water absorption rate | ASTM D570/ISO 62 | 0.2 % |
| processability | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| Shrinkage rate | 流动方向(垂直方向) | ASTM D-955 | 0.5-0.7 % |
| physical property | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| transmittance | 厚度3mm | ASTM D-1003 | 88 % |
| Thermal performance | Test Condition | Test Method | JIAXING TEIJIN/L-1225L |
|---|---|---|---|
| TEMPERATURE | 电学式，厚度1.47mm | UL 746B | 125 °C |
| Heat distortion temperature | 负荷0.451MPa(4.6kgf/cm)，HDT | ASTM D-648 | 141 °C |
| TEMPERATURE | 非冲击式，厚度1.47mm | UL 746B | 125 °C |
| 冲击式，厚度1.47mm | UL 746B | 115 °C | |
| Linear coefficient of thermal expansion | 流动方向(垂直方向) | ASTM D-696 | 7 |
| Heat distortion temperature | 负荷1.813MPa(18.6kgf/cm)，HDT | ASTM D-648 | 131 °C |
Contact Us
Get App
Top