Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP ADDILENE H 410 ADDIPLAST FRANCE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 410 |
---|---|---|---|
Impact strength of cantilever beam gap | ISO 180/1A | 4.0 kJ/m² | |
Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
Charpy Notched Impact Strength | ISO 179/1eA | 3.5 kJ/m² |
hardness | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 410 |
---|---|---|---|
Shore hardness | 邵氏D | ISO 868 | 74 |
Electrical performance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 410 |
---|---|---|---|
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
Surface Resistivity | IEC 60093 | 1E+14 ohms | |
Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 0 |
Mechanical properties | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 410 |
---|---|---|---|
tensile strength | 断裂 | ISO 527-2 | 30.0 MPa |
Tensile strain | 断裂 | ISO 527-2 | >100 % |
tensile strength | 屈服 | ISO 527-2 | 41.0 MPa |
Flexural modulus | ISO 178 | 1300 MPa |
physical property | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 410 |
---|---|---|---|
density | ISO 1183/A | 0.900 g/cm³ | |
melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 12 g/10min |
Thermal performance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 410 |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ISO 75-2/Af | 63.0 °C |
vicat | ISO 306/A50 | 153 °C | |
melting temperature | ISO 3146 | 165to168 °C |
Contact Us
Get App
Top