Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PSU P-3500 LCD SOLVAY USA
UDEL®
Home appliance components,Industrial components
Hydrolysis resistance,Chemical resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SOLVAY USA/P-3500 LCD |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 174 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.6E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | SOLVAY USA/P-3500 LCD |
|---|---|---|---|
| Bending modulus | ASTM D790 | 2690 Mpa | |
| bending strength | ASTM D790 | 106 Mpa | |
| elongation | Break | ASTM D638 | 50to100 % |
| Tensile modulus | ASTM D638 | 2480 Mpa | |
| tensile strength | Break | ASTM D638 | 70.3 Mpa |
| Electrical performance | Test Condition | Test Method | SOLVAY USA/P-3500 LCD |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D150 | 3.02 |
| 1kHz | ASTM D150 | 3.04 | |
| 60Hz | ASTM D150 | 3.03 | |
| Dielectric strength | ASTM D149 | 17 KV/mm | |
| Dissipation factor | 1MHz | ASTM D150 | 6E-03 |
| 60Hz | ASTM D150 | 7E-03 | |
| 1kHz | ASTM D150 | 1E-03 | |
| Volume resistivity | ASTM D257 | 3E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | SOLVAY USA/P-3500 LCD |
|---|---|---|---|
| melt mass-flow rate | 343°C/2.16kg | ASTM D1238 | 3.0to5.0 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.70 % |
| Water absorption rate | 24hr | ASTM D570 | 0.30 % |
| impact performance | Test Condition | Test Method | SOLVAY USA/P-3500 LCD |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D1822 | 420 kJ/m² |