Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 CM1001G-20 TORAY JAPAN
Amilan®
--
High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -40°C | kJ/m² | 25 |
| 23°C | kJ/m² | 55 |
| hardness | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| Rockwell hardness | M计秤,23°C | 92 -- | |
| R计秤,23°C | 120 -- | ||
| R计秤,80°C | 12 -- |
| Basic performance | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| Water absorption rate | 24小时 23℃ | ASTM D-570 | 1.3 % |
| Mechanical properties | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| compression stress | -40°C | MPa | 240 -- |
| Taber abraser | 1000Cycles | mg | 0.300 -- |
| Tensile and flexural strength | 23℃ | ASTM D-638 | 1200 kg/cm |
| bending strength | 23°C | MPa | 205 -- |
| -40℃ | ASTM D-790 | 2400 kg/cm | |
| Rockwell hardness | ASTM D785 | R120.M92 | |
| Tensile strain | 断裂,80°C | % | 5.0 5.5 |
| 断裂,23°C | % | 3.0 | |
| Flexural modulus | 80℃ | ASTM D-790 | 29000 kg/cm |
| Rockwell hardness | R-标度 23℃ | ASTM D-785 | 120 |
| shear strength | 23°C | MPa | 115 65.0 |
| Flexural modulus | 23°C | MPa | 6800 3500 |
| Rockwell hardness | M-标度 23℃ | ASTM D-785 | 92 |
| Tensile strain | 断裂,-40°C | % | 2.5 3.0 |
| bending strength | 80℃ | ASTM D-790 | 1000 kg/cm |
| compression stress | 80°C | MPa | 90.0 -- |
| Flexural modulus | 80°C | MPa | 3200 2600 |
| -40℃ | ASTM D-790 | 78000 kg/cm | |
| bending strength | 80°C | MPa | 115 -- |
| Izod Heng Strike | 23℃ V-缺口1/2 | ASTM D-256 | 6 kg·cm/cm |
| tensile strength | 23°C | MPa | 120 -- |
| compression stress | 23°C | MPa | 155 80.0 |
| elongation at break | 23℃ | ASTM D-638 | 5 % |
| bending strength | 23℃ | ASTM D-790 | 1800 kg/cm |
| Flexural modulus | 23℃ | ASTM D-790 | 60000 kg/cm |
| -40°C | MPa | 8700 7300 | |
| bending strength | -40°C | MPa | 275 -- |
| Friction coefficient - vs. Metal | 0.15 -- |
| Electrical performance | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| dielectric constant | 23°C,50Hz | 4.60 -- | |
| 23°C,1MHz | 3.80 -- | ||
| arc resistance | sec | 120 -- | |
| Dissipation Factor | 23°C,50Hz | 0.040 -- | |
| 23°C,1MHz | 0.030 -- | ||
| dielectric constant | 23°C,1kHz | 4.40 -- | |
| Volume resistivity | ohms·cm | 1E+15 1E+12 | |
| dielectric strength | 1/8" 短时间 | ASTM D-149 | 20 KV/mm |
| Volume resistivity | ASTM D-257 | 10 Ω·cm | |
| dielectric strength | kV/mm | 20 -- | |
| Dissipation Factor | 23°C,1kHz | 0.040 -- | |
| Volume resistivity | ASTM D257/IEC 60093 | 10^13 Ω.cm |
| Physical properties | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.29 | |
| Water absorption rate | ASTM D570/ISO 62 | 1.3 % |
| flammability | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | HB -- |
| physical property | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| Shrinkage rate | MD:3.00mm4 | % | 0.30-0.50 -- |
| Water absorption rate | 饱和,23°C | % | 7.8 -- |
| filler content | 20 wt% | ||
| Shrinkage rate | TD:3.00mm3 | % | 0.60-0.90 -- |
| Taber abraser | (1000g,CS-17)23 ℃ | ASTM D-1044 | 12 mg/1000次 |
| Water absorption rate | 23°C,24hr | % | 1.3 -- |
| Thermal performance | Test Condition | Test Method | TORAY JAPAN/CM1001G-20 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | °C | 215 -- |
| 18.6kg/cm，HDT | ASTM D-648 | 185 °C | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 3E-05 -- |
| melting temperature | °C | 225 -- | |
| 差示扫描测热计DSC | 225 °C | ||
| specific heat | 0.36 Cal/g·℃ | ||
| Linear coefficient of thermal expansion | ASTM D-696 | 3 | |
| Heat distortion temperature | 4.6kg/cm，HDT | ASTM D-648 | 215 °C |
| specific heat | J/kg/°C | 1600 -- | |
| thermal conductivity | W/m/K | 0.33 -- | |
| melting temperature | 225 ℃（℉） |
Contact Us
Get App
Top