Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA RTP 200 E RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 200 E |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 无断裂 |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 80 J/m |
| hardness | Test Condition | Test Method | RTP US/RTP 200 E |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 128 |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 200 E |
|---|---|---|---|
| tensile strength | ASTM D638 | 96.5 MPa | |
| elongation | 屈服 | ASTM D638 | >10 % |
| Tensile modulus | ASTM D638 | 2340 MPa | |
| Flexural modulus | ASTM D790 | 2760 MPa | |
| bending strength | ASTM D790 | 124 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP 200 E |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | RTP US/RTP 200 E |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.50to0.70 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.45 % |
| water content | 0.10 % | ||
| density | ASTM D792 | 1.18 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 200 E |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 123 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 127 °C | |
| Linear coefficient of thermal expansion | MD | ASTME831 | 6.1E-05 cm/cm/°C |
Contact Us
Get App
Top