Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PET AV2 370 DSM HOLAND
Arnite®
Electronic and electrical components,Electrical applications,Industrial components
Glass fiber reinforced,Not resistant to hot wate,Dimensional stability
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Other performance | Test Condition | Test Method | DSM HOLAND/AV2 370 |
---|---|---|---|
UL flame retardant rating | 1.50 mm | IEC 60695-11-10, -20 | HB |
0.750 mm | IEC 60695-11-10, -20 | HB |
Basic Performance | Test Condition | Test Method | DSM HOLAND/AV2 370 |
---|---|---|---|
density | ISO 1183 | 1.63 g/cm³ | |
Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 0.18 % |
Saturation, 23°C | ISO 62 | 0.45 % |
thermal performance | Test Condition | Test Method | DSM HOLAND/AV2 370 |
---|---|---|---|
Hot deformation temperature | 1.8 MPa,Unannealed | ISO 75-2/A | 235 °C |
0.45 MPa,Unannealed | ISO 75-2/B | 250 °C | |
Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 0.000025 cm/cm/°C |
Transverse | ISO 11359-2 | 0.000040 cm/cm/°C |
mechanical properties | Test Condition | Test Method | DSM HOLAND/AV2 370 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eA | 12 kJ/m² |
-30°C | ISO 179/1eA | 12 kJ/m² | |
Tensile modulus | ISO 527-2 | 13000 MPa | |
Tensile strain | Break | ISO 527-2 | 2.5 % |
tensile strength | Break | ISO 527-2 | 185 MPa |
Electrical performance | Test Condition | Test Method | DSM HOLAND/AV2 370 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | V | |
Dielectric loss | 1E+6HZ | IEC 60250 | 0.013 |
100HZ | IEC 60250 | 0.0030 | |
Dielectric strength | IEC 60243-1 | 33 kV/mm | |
Relative permittivity | 100HZ | IEC 60250 | 3.70 |
1E+6HZ | IEC 60250 | 3.50 | |
Surface resistivity | IEC 60093 | > 1.0E+15 ohms | |
Volume resistivity | IEC 60093 | > 1.0E+15 ohm·cm |