Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Epoxy Epoxies, Ect. 50-3182 NC (Cat. 190) Epoxies, Etc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 50-3182 NC (Cat. 190) |
---|---|---|---|
Impact strength of cantilever beam gap | 19 J/m |
Supplementary Information | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 50-3182 NC (Cat. 190) |
---|---|---|---|
operate temperature | -55.0-205 °C |
Mechanical properties | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 50-3182 NC (Cat. 190) |
---|---|---|---|
bending strength | 93.1 MPa |
thermosetting | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 50-3182 NC (Cat. 190) |
---|---|---|---|
Thermosetting mixed viscosity | 25°C | 90000 cP |
Uncured Properties | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 50-3182 NC (Cat. 190) |
---|---|---|---|
MixRatiobyWeight(PBW) | PartB | 3.0to4.0 | |
固化时间(66°C) | 2.0 hr | ||
密度2(25°C) | 2.29 g/cm³ | ||
PartA | 100 |
Cured Properties | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 50-3182 NC (Cat. 190) |
---|---|---|---|
Tensile modulus | 10300 MPa | ||
Water absorption rate | 0.11 % | ||
dielectric strength | 22 kV/mm | ||
Volume resistivity | 4.9E+16 ohms·cm | ||
Dissipation Factor | 60Hz | 0.018 | |
compressive strength | 117 MPa | ||
relative permittivity | 60Hz | 6.40 | |
tensile strength | 58.6 MPa | ||
Shore hardness | ShoreD | 95 |
physical property | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 50-3182 NC (Cat. 190) |
---|---|---|---|
Shrinkage rate | MD | 0.10 % |
Thermal performance | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 50-3182 NC (Cat. 190) |
---|---|---|---|
Heat distortion temperature | HDT | 175 °C | |
thermal conductivity | 1.7 W/m/K | ||
Linear coefficient of thermal expansion | MD | 3E-05 cm/cm/°C |
Contact Us
Get App
Top