Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

HIPS NS-050 IDEMITSU MALASIA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | IDEMITSU MALASIA/NS-050 |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256 | 69 J/m |
Mechanical properties | Test Condition | Test Method | IDEMITSU MALASIA/NS-050 |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 40 % |
tensile strength | ASTM D638 | 23.5 MPa |
flammability | Test Condition | Test Method | IDEMITSU MALASIA/NS-050 |
---|---|---|---|
UL flame retardant rating | 2.00 mm | UL 94 | V-0 |
squeeze out | Test Condition | Test Method | IDEMITSU MALASIA/NS-050 |
---|---|---|---|
drying temperature | 70.0 °C | ||
die temperature | 190 to 220 °C | ||
drying time | 1.0 to 2.0 hr | ||
Barrel Temperature | 200 to 240 °C |
physical property | Test Condition | Test Method | IDEMITSU MALASIA/NS-050 |
---|---|---|---|
density | ASTM D792 | 1.15 g/cm³ | |
melt mass-flow rate | 200°C/5.0 kg | ASTM D1238 | 7.0 g/10 min |
injection | Test Condition | Test Method | IDEMITSU MALASIA/NS-050 |
---|---|---|---|
drying time | 1.0 to 2.0 hr | ||
Temperature in the middle of the barrel | 190 to 220 °C | ||
Temperature at the rear of the barrel | 180 to 210 °C | ||
drying temperature | 70.0 °C | ||
Temperature at the front of the material cylinder | 210 to 240 °C | ||
Temperature | 40.0 to 60.0 °C | ||
Spray nozzle temperature | 200 to 230 °C |
Contact Us
Get App
Top