Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PAS RTP ESD A 1680 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP ESD A 1680 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 43 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 530 J/m |
| Electrical performance | Test Condition | Test Method | RTP US/RTP ESD A 1680 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+06 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1E+09 ohms |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP ESD A 1680 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.5 % |
| tensile strength | ASTM D638 | 103 MPa | |
| Tensile modulus | ASTM D638 | 8960 MPa | |
| Flexural modulus | ASTM D790 | 8270 MPa | |
| bending strength | ASTM D790 | 165 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP ESD A 1680 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP ESD A 1680 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.40 % |
| density | ASTM D792 | 1.39 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.20 % |
| Thermal performance | Test Condition | Test Method | RTP US/RTP ESD A 1680 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 204 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 207 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.8E-05 cm/cm/°C |
Contact Us
Get App
Top