Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PET FR530 NC010 DUPONT USA
Rynite®
Electrical field,Electronic field,Household appliances,Household appliances,Automotive sector
enhance,Glass fiber reinforced,wear resistant,High rigidity,High temperature resistan
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | DUPONT USA/FR530 NC010 |
---|---|---|---|
Combustibility (rate) | UL 94 | V-0 | |
Extreme Oxygen Index | ASTM D2863 | 33 % | |
Hot deformation temperature | 264 psi,Unannealed | ASTM D648 | 224 °C |
66 psi, Unannealed | ASTM D648 | 246 °C | |
HDT | ASTM D648/ISO 75 | 225 ℃(℉) | |
Linear coefficient of thermal expansion | ASTM E831 | 0.000019 cm/cm/ ℃ | |
Melting temperature | 254 °C | ||
252 ℃(℉) | |||
UL flame retardant rating | 0.750mm | UL94 | V-0 |
1.50mm | UL94 | V-0 | |
0.350mm | UL94 | V-0 | |
3.00mm | UL94 | V-0 | |
0.900mm | UL94 | V-0 | |
UL 94 | V-0 | ||
2.00mm | UL94 | V-0 |
mechanical properties | Test Condition | Test Method | DUPONT USA/FR530 NC010 |
---|---|---|---|
Bending modulus | 23℃,压缩模塑 | ISO 178 | 10500 MPa |
ASTM D790 | 10300 Mpa | ||
ASTM D790/ISO 178 | 10500 kg/cm²(MPa)[Lb/in²] | ||
bending strength | ASTM D790/ISO 178 | 200 kg/cm²(MPa)[Lb/in²] | |
ASTM D790 | 200 Mpa | ||
compressive strength | ASTM D695 | 200 Mpa | |
Elongation at Break | ASTM D638 | 2.1 % | |
Impact strength of cantilever beam gap | ASTM D256 | 91 J/m | |
Suspended wall beam without notch impact strength | ASTM D256 | 585 J/m | |
Tensile modulus | ASTM D638 | 11000 Mpa | |
23℃,Injection | ISO 527-1 | 11500 MPa | |
ASTM D412/ISO 527 | 11500 kg/cm²(MPa)[Lb/in²] | ||
tensile strength | ASTM D638 | 138 Mpa |
other | Test Condition | Test Method | DUPONT USA/FR530 NC010 |
---|---|---|---|
characteristic | 15%玻纤增强.阻燃.电气和机械性能.高温、阻力和流量 |
Physical properties | Test Condition | Test Method | DUPONT USA/FR530 NC010 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1680 | |
Shrinkage rate | ASTM D955 | 0.8 % | |
3.20 mm,垂直 | ASTM D955 | 0.0075 cm/cm | |
3.20 mm,平行Flow | ASTM D955 | 0.0025 cm/cm |