Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Polifil® PP GFPPCC-10 美国The Plastics
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | 美国The Plastics/Polifil® PP GFPPCC-10 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 64 J/m |
| GardnerImpact | 23°C,12.7mm | ASTM D3029 | 0.904 J |
| hardness | Test Condition | Test Method | 美国The Plastics/Polifil® PP GFPPCC-10 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 85 |
| Mechanical properties | Test Condition | Test Method | 美国The Plastics/Polifil® PP GFPPCC-10 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 65.5 MPa |
| tensile strength | 23°C | ASTM D638 | 53.8 MPa |
| Tensile modulus | 23°C | ASTM D638 | 2280 MPa |
| Flexural modulus | 23°C | ASTM D790 | 2690 MPa |
| elongation | 屈服,23°C | ASTM D638 | 3.0 % |
| 断裂,23°C | ASTM D638 | 6.0 % |
| physical property | Test Condition | Test Method | 美国The Plastics/Polifil® PP GFPPCC-10 |
|---|---|---|---|
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 4.0to10 g/10min |
| density | ASTM D792 | 0.978 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.60 % |
| Thermal performance | Test Condition | Test Method | 美国The Plastics/Polifil® PP GFPPCC-10 |
|---|---|---|---|
| Hot deformation temperature (HDT) | 1.8MPa,未退火，HDT | ASTM D648 | 124 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 141 °C |
Contact Us
Get App
Top