plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT 6300B JAPAN POLYPLASTIC
DURANEX® 
Automotive Applications
Low warpage
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/6300B
Rockwell hardnessM-ScaleISO 2039-290
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/6300B
ColourNumberEF2001/ED3002
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/6300B
Combustibility (rate)UL 94HB
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A110 °C
1.8MpaISO 75-1/-2160 °C
Linear coefficient of thermal expansionFlowISO 11359-29 ×10-5/℃
MD:23to55°CInternal Method9E-05 cm/cm/°C
Across FlowISO 11359-29 ×10-5/℃
ASTM D696/ISO 113599 mm/mm.℃
TD:23to55°CInternal Method9E-05 cm/cm/°C
UL flame retardant ratingUL 94HB
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/6300B
Bending modulusISO 1783900 Mpa
ASTM D790/ISO 1783900 kg/cm²(MPa)[Lb/in²]
bending strengthASTM D790/ISO 17891 kg/cm²(MPa)[Lb/in²]
ISO 17891.0 Mpa
Charpy Notched Impact StrengthISO 179/1eA2.0 kJ/m²
Elongation at BreakASTM D638/ISO 5272.5 %
Tensile strainBreakISO 527-1/-22.5 %
BreakISO 527-25.0 %
tensile strengthISO 527-1/-253 Mpa
ASTM D638/ISO 52753 kg/cm²(MPa)[Lb/in²]
ISO 527-255.0 Mpa
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/6300B
Compared to the anti leakage trace indexIEC 60112PLC 2
Dielectric strength3.00mmIEC 60243-120 KV/mm
Surface resistivityIEC 600935×1016 Ω
Volume resistivityIEC 600938E+15 ohms·cm
ASTM D257/IEC 600938.0 x 10^15 Ω.cm
IEC 600938×1015 Ω.cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/6300B
densityASTM D792/ISO 11831.53
Water absorption rate23°C,24hrISO 620.10 %
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/6300B
UL flame retardant ratingUL 94HB